PuzzleLock Playsets

IMG_4738

In February, I debuted the PuzzleLock Caves and PuzzleLock Dungeon at Con Nooga in Chattanooga. The response was very good, so tomorrow we are launching a Kickstarter to fund the creation of more PuzzleLock playsets!

These playsets are 28mm scale terrain for tabletop role-playing games like Dungeons & Dragons. They help create an immersive gaming experience. They are printed on a $200 home 3D printer, and I printed the entire dungeon on a $20 roll of filament!

Unlike other systems, PuzzleLock doesn’t require any clips or magnets. It goes together like a jigsaw puzzle!

Caves_promo2

Untitled-2
Untitled-5

The Caves are 100mm point to point and about 35mm tall. The sides of the hexagons are 50.8mm (2″) and can connect to any other PuzzleLock playset.

The PuzzleLock Caves are available NOW at Cults3D:
https://cults3d.com/en/3d-model/game/puzzlelock-caves

Also available at DriveThruRPG:
https://www.drivethrurpg.com/product/267106/PuzzleLock-Caves

Dungeon_promo2

 

Untitled-3
The Dungeon set includes a “stair jack” for placing minis on the steps, and also a couple of “grid-painting” jigs for gamers who prefer a 1″ grid on their tiles.

Untitled-4

Untitled-6

The dungeon tiles are 50.8mm ( 2″) square, and about 35mm tall. They work with all other PuzzleLock Tiles. Dungeons are available NOW
on Cults3D:
https://cults3d.com/en/3d-model/game/puzzlelock-dungeon
on DriveThruRPG:
https://www.drivethrurpg.com/product/267145/PuzzleLock-Dungeon

All of the PuzzleLock playsets are delivered as .STL files, which are 3D models that can be printed on a home 3D Printer.

IMG_4469

The Kickstarter was 857% funded! Stretchgoals for Traps & Secret Doors and Sewers & Undercity were unlocked and will be available on DriveThruRPG and Cults3D after they are sent to backers.

Cave Drider

One of the strengths of 3D printing is the ability to create shapes that cannot be manufactured with traditional methods like injection-molding.  I want  to try and create miniatures that take advantage of this, rather than cut up the model as if it were going to be molded.

Since my last project was 3D printable Caves for tabletop gaming, I decided to create some miniatures to populate those caverns, and to design them for small SLA printers like Anycubic Photon and Sparkmaker to take advantage of the amazing level of detail that they can reproduce.

Drider_Archer03

Drider_Archer01

Drider_Archer02

Photo Dec 20, 5 20 43 AMThe “Drider” is a creature familiar to players of Dungeons & Dragons or Pathfinder. It is part dark elf and part spider.  Driders are often portrayed as a “spider centaur” with the upper body very human (or elf), but I decided that my cave driders were especially cursed–even their faces transformed into a spider!

Drider_AXE03

Drider_AXE01

Drider_AXE02

Photo Dec 20, 5 18 50 AM

I have 3 different weapon poses, and also a Dead Drider option–so that the Dungeon Master can switch out miniatures rather than tipping over the dead monsters.

Drider_crossbow1

Drider_crossbow2

Drider_crossbow3

Photo Dec 20, 5 20 06 AM

Drider_dead2

Drider_dead1

Photo Dec 20, 5 21 25 AM

Driders_1

This Bundle of STL files is available for only $10 at Cults3D

Caves of Chaos

KeepontheBorlderlands
Artwork from “The Keep on the Borderlands” by TSR Games

When I first played Dungeons & Dragons as a teenager,  the first adventure was the Keep on the Borderlands. The monsters were in an area of the map called The Caves of Chaos! I have a lot of great memories of those years, so when I started thinking about designing some 3D printable terrain for table-top gaming I naturally started think of those caves….

There are a number of kickstarted companies that are selling .STL files for 3D printing. I realized when I started checking them out, that the gaming community has eagerly adopted this technology, and there might be an opportunity for me in this area.

Before 3D printing, a company called Dwarven Forge was already making a very high-quality hand-sculpted and hand-cast resin terrain for gaming, but it is very expensive. What I noticed right away about the designs from these newer companies is that they were basically copying the designs of Dwarven Forge– The tiles were all 2″ squares, about a half inch thick, in all sorts of configurations to help you layout your dungeon.

However 3D printed PLA plastic is a lot lighter than Dwarvenite resin… So the 3D printed pieces have to be clipped or glued together so they don’t get scattered all over the table. I felt that the designers had failed to approach the problem from scratch with the strengths of 3D printing in mind. On top of that, the Caverns and caves were all rectangular and ugly….

I decided that I would start from scratch. One of the strengths of 3D printing is the ability to create complicated shapes that would be difficult or impossible to create through traditional manufacturing.  I wanted to build complete pieces that were ready to paint and play, with no assembly.  Instead of squares, I started with a hexagon and began to calculate the number of possible passageways that could come in and out of a 6-sided tile.

Photo Jan 27, 10 00 26 AM

The biggest tile that I can print on my Printrbot is 6″, though that is pretty small compared to a lot of FDM printers, which would be big enough to not get knocked over during play. Since it doesn’t have to attach to the other tiles for stability, That gives you the freedom to rotate the tiles and quickly reconfigure the game map.  Because the 3D print is starting from the ground, and there is no need for the additional structure to clip tiles together, I decided to make the floor 1/8″ thick–thick enough to be sturdy, but not wasting plastic.

I kept the 2″ standard for the openings of the passages, and the 2″ overall height (taller than that interferes with visibility of the miniatures).

My wife and I visited Cumberland Caverns in McMinnville Tennessee, which is the largest cave complex in our state, for some inspiration.

Once I was back home in the studio, I opened ZBrush and created a template for the tiles, ensuring that I could make all of the tiles mate up perfectly when printed.

Caves030

I ended up creating 22 Hex tiles, which could create and endless cavern across the tabletop. The tiles print with no support, and require no assembly.

Caves_set

Here is just a quick sample of the types of cavern layouts you can create:

Once I had the pieces sculpted, I decimated the models to create a high-resolution polygon mesh, and exported the .STL files.

Caves032

Edit: I have gone back an added some Cave Entrances as well as Hex rings with OpenLOCK and Magnetic connection (because people kept asking for it), and an OpenLOCK compatible dungeon entrance so that you can connect these Caves to the rest of your dungeon:

Caves_Entrance_C4

Caves_Entrances_3

If you are a gamer, and would like to print your own endless caverns and caves, you can get the set of .STL files here:

On MyMiniFactory:
https://www.myminifactory.com/object/3d-print-caves-77276

On Cults3D:
https://cults3d.com/en/3d-model/game/caves

On DriveThruRPG:
https://www.drivethrurpg.com/product/232472/Caves

On RenderHub:
https://www.renderhub.com/zandoria/caves